I’ll admit it, I am totally clueless when it comes to installing drip lines. Emitters, bubblers, reservoirs, lines, etc. the whole idea just seems way too complicated for watering plants. There had to be a better way?
There also had to be a dog proof way? Anyone who’s raised a teething puppy probably knows drip systems, are prime targets. (Instant chew toy and tug toy rolled into one.) Luckily our dogs leave heavy duty/commercial grade garden hoses alone. Therefore it made perfect sense to construct our DIY soaker hose drip system out of an old hose.
We already had an old black, heavy duty garden hose that needed replacing. However we needed a second one, for extra length since our water source was so far away. The last of the materials were 12 brass hose mender kits, and a 5/8 inch (inside diameter) 50ft black soaker hose.
Then we measured and cut pieces of soaker hose for each raised planter box and pot. (Be sure to purchase the non-fabric soaker kind that doesn’t bend easily.)We were sure each piece could easily wrap around the inside of the planter box, creating a loose loop (and being generous with the lengths) Next we cut the hose, making sure there was enough length to follow the fence line.
Then we inserted the hose mender brass fitting into the hose, with the other end being the soaker hose loop. Essentially for each soaker loop/pot you will need two hose mender kits if you want several pots lined up. Be sure to string the metal bands onto the hoses, and tighten them over each hose with a flat head screwdriver.
Then we secured each loop together with black zip ties and sunk them into the soil around each plant. Basically the pattern should be: garden hose, then soaker hose loop in the pot/planter, then garden hose. This pattern allowed us to spread out the pots along our side yard. At our last pot, we created a loop out of the capped end of the soaker hose.
Next came securing the garden hose to the fence and soaker hose loops in the pots.We sunk the soaker hose into the pots with garden staples.Then for the next step we used 3/4″shark bite plastic pipe brackets.
These brackets come with nails inside them for easy use. Just put one around the hose, place the hose and bracket on the fence and hammer it in place.
Also if you have a completely paved area and can’t install a sprinkler system, this easy drip system is a great way to bring a large amount of water to big pots, all you need is a water spigot. A simple solution for busy people (who hate hand watering their gardens).