Super Easy (and Cheap) Curtain Rod Hack: West Elm with Wood

For 6 months I was secretly watching these beautiful West Elm curtain rods, crossing fingers they’d drop in price… 

 

Um yeah no…Sorry West a Elm we just can’t drop a dime on curtain rods right now. (As pretty as they are😞) 

Instead we had these Martha Stewart “door knob” curtain rods, as free hand me downs… 

 

I guess these might be pretty but they aren’t the clean and simple lines of midcentury. West Elm seems to have captured that with their curtain rods. Darn them and their addicting product lines! Oh the decorating torture! 

After putting up our oversized map in the guest room I soon realized the existing curtain rods were too traditional and “knobby”. Also the “wood” frame of the map gave inspiration and would help tie the wood and metal together in the room. 

First we had some random dowels left over from our guest house cabinet project which I cut in 4 equal sizes. (I went with a longer 3inch length since I only have a hand saw and did not want to cut off a finger.) Then sanded each piece smooth. 

 

I found theses handy dandy curtain rod connector screws, and drilling pilot holes, screwed them into each piece.

     

Once done, I unscrewed each of the existing rod ends and replaced them with the new wooden dowel ends. 

 

Ridiculously easy way to change your existing curtain rods style without spending a mint. Hope you all have a safe and fun holiday weekend! Happy Sunday everyone! 

Part 3: Kitchen Make-over…Encore Countertops (Tips and Helpful Hints for Applying on Tile)

Last we left off Encore Decorative Countertop System was rescuing us from ugly tye-dyed yellow and brown tile countertops…

20140510-064057.jpg

Our first step in the process was choosing the right color for our kitchen and measure the countertops. We went with River Rock a newer color offered by Encore. A mossy grayish (soapstone-esque) the next shade down from their lightest color Cement. One of the big factors in our choice was “PTSD” from our fireplace experience and we were worried a traditional gray would look bluish in different lights. However I still labored under the decision…We had two sets of parents over to confirm our colors…(It’s totally normal in our family to hold “family conferences” over decor selections) πŸ˜‰

20140510-065204.jpg

20140510-065259.jpg
We also measured out our countertop space and the awesome folks at Encore came up with just over 50 sq ft (not including our backsplash) of tile to cover. Which in “normal” circumstances would have been fine however we’re (ahem…) special and not in a good way…I’ll explain later…

As for supplies DO NOT SKIMP, when the kits arrive, take your detailed list of materials/tools needed in the instructions and buy exactly what’s on that list at one of the big box stores. Get the disposable buckets, the plastic, 3M Tape, etc. (except buy an extra three rolls) Totally worth it, if you’re busy like us and want your project to go as smooth as possible.

Important supply tip: Collapse and flatten cardboard to lay on the ground, this will save your floors. Also when you are done with each step, take the cardboard outside and give your floors a quick vacuum with the shop vac, keeps dogs and husbands from tracking dust and materials around the house. (Remember this pic…)

20140510-071346.jpg
As for prepping we had our electric cooktop removed since we needed to update the electrical with a junction box, however we did leave our semi-under mount sink in place.
Another great tip we found to be helpful: If you need to recaulk your sink like we needed to, remove the old caulk and using the 3M tape, line the edges of the sink and protect basin with plastic. Just replace the tape between each step in the process and we were good to go. (After the countertops cured we caulked the sink with waterproof clear silicone)
Next came the task of degreasing 30+ year old tile. Luckily we found the Clorox degreaser to be fine and didn’t need to use TSP.

20140510-072404.jpg
As for the rest of prepping we taped off the backsplashes, and wood paneling of our built-in since it acts like a secondary counter space. (Notice the top is laminate…It was really awesome to have a comparison between applying Encore to a tile versus laminate surface)

20140510-072807.jpg

20140510-072830.jpg

20140510-072901.jpg

Next came applying the first step of Super Bond…This stuff is the “magic sauce”

20140510-073055.jpg
Now unfortunately we had a hiccup in our process that many will hopefully not encounter…Its called 1970s nearly a 1/4-1/2 inch, wide and deep grout lines with “textured” tile. See the grooviness after our first application of super bond.

20140510-073452.jpg
Here is layer two…

20140510-073648.jpg
And this is where we ran out…The recommended layers of super bond for tile to prevent grout lines would be three applications. In this case if you have tile like ours we recommend buying an extra can of super bond. Here is layer #3

20140510-074029.jpg

20140510-074050.jpg

20140510-074130.jpg
The laminate still only needed it’s two normal layers and looked of course fabulous.

20140510-074301.jpg
As you can see in the pics we found removing the tape and plastic between the kit’s “Days” to be very helpful, it kept everything cleaner and felt less like a project zone. Also the basic four inch putty knife was the best for sanding/scraping away excess build up and smoothing out the super bond. We lightly scraped at a 45 degree angle and it seemed more effective for us than the sandpaper, but we still used both.

20140510-074803.jpg

20140510-074817.jpg

20140510-074831.jpg
Now onto the fun part…Last stages Day 2 and Day 3… This is when we saw the countertops emerge from grainy cement-glue to beautiful gleaming surfaces. FYI Save these steps for a weekend. We devoted an entire hot Saturday for Day 2 to allow for dry-cure times. Sanding by hand was also a breeze. One layer…

20140510-075524.jpg
Two layer…Three layer…Four

20140510-075644.jpg

20140510-075707.jpg

20140510-075819.jpg
The sealing was the easiest and only took us a couple hours of applying and dry time Sunday evening.

We found to be a great technique through the “Day 2” and “Day 3” process if working with another person, is one be the “applier” and one be the assistant kind of like a surgeon needs someone to hand him a scalpel. The person who’s taken the most ceramics and art classes should probably be the “applier” since the materials are different than the super bond. The “assistant” in our case was the dog wrangler, cleaner, troubleshooter, tool assistant, supply handler, etc. One person can probably do the entire project on their own easily but we found it to be faster with the both of us using this technique.

Last tip, start your project early to allow for long cure times. This will maximize the strength of the bonding. We found this schedule to be helpful since we have full time careers:

WEDNESDAY:Prep, clean, and apply first layer of Super Bond in the evening afterwork, then allow to dry overnight and next day while at work.

THURSDAY: In evening sand and then apply second layer, allow to dry overnight and next day.

FRIDAY: Evening again, sand and apply last coat. Remove tape.

SATURDAY: Sand, clean, remove and replace the tape and plastic. Then follow all directions for DAY 2. We also removed the tape on backsplash and sink at the end and allowed to cure/dry overnight.

SUNDAY: Afternoon re-tape, then apply sealant, allow to dry followed by second sealant. Remove tape, plastic and dry overnight.

However we did not rest a single item on the countertops or use the kitchen for a week. We know how un-careful we can be and didn’t want to risk it. Again cure/dry times can vary so this schedule may not be be necessary. Also your tile may not be as “groovy and grouty” as ours was. Therefore your process will probably be simpler and easier. Yet to go from this…

before-ceramic-tiles-encore-countertop-system.jpg

before-laying-encore-countertop-concrete-system-on-ceramic-tile.jpg

laying-encore-concrete-countertops-over-tile-.jpg

encore-countertops-river-rock-on-ceramic-tile-counters.jpg

We can’t wait to share more of the “after” pics in the coming weekends. Especially with our updated backsplash and painters tape gone, the countertops really pop! We are truly grateful of Encore’s generous support and their beautiful product! We couldn’t be happier with the results! Thanks everyone for hanging with us, more make-over posts to come…Happy Sunday everyone!

 

Ceiling Fan Re-deux

Here’s to the easiest DIY improvement year to date! Any homeowner or renter has encountered ugly ceiling fans at some point. Many replace them, others paint them, and then a few of us disguise them. Hands down disguising is the easiest and cheapest technique. Here’s a shot of the infamous 1980s, “mosquito fan” in the kitchen/dining room:

20140308-063432.jpg
It also doesn’t help with the ugliness, that this is the only room in the house with remnants of popcorn ceiling (albeit shaved off and painted). We also have a love-hate relationship with the original midcentury, tweed half- drapes (behind the fan) but that’s another story for another time.

However the fan is a high quality, Casablanca. Quiet, multiple speeds and fabulous light. Not bad for an 80’s throwback? Yet the fan needed an update. During our two weekends of marathon painting I finally grew tired of looking at it. Grabbing a drum shade from another light in the house and extra extenders I gave it the ol’ college try.

We used the same technique as our last, except we were able to use a smaller extender.

20140308-072213.jpg

20140308-072238.jpg

Yet altered our technique by adding a large washer between the shade and connectors in order to stabilize the shade. We also did not add extra chain and threaded the main chain through the middle of the shade. This allowed for a cleaner look.

20140308-072911.jpg

Lights on!

20140308-072956.jpg
Such an improvement! It’s almost pretty!
We actually are warming up to the cream colored fan blades and hint of gold brass. Originally we had the notion to paint the whole thing oil rubbed bronze, but the dark color would’ve drawn the eye towards ugly ceilings.
Also brass is starting to make a come back, and the fan ties in well to our mid century gold knobs in our built ins.

20140308-074434.jpg
Now the light is complementary and blends well with the room.

20140308-074621.jpg
Slow and steady seems to be our slogan these days. I’m sure you’ve all been in that frustrating place, torn between a budget and beautification? I think the muddy paw prints all over newly painted floors did me in. I am seriously close to entering us into one of those home make over contests! Ahmed of Yard Crashers may have a DIYer stalking him soon(just kidding Ahmed, nothing but love)

Who would’ve thought bringing a kitchen back to a neutral color pallet has been more work than expected. At least this was one easy and cheap update.

20140308-075600.jpg
Back to painting…Happy Sunday everyone!